|
As soon as the NPC-1 TCP/IP interface is connected to a network it can be configured directly through any NetControl® applications. Although, sometimes you have to setup the NPC-1 through the serial port. For this setup you need a null modem cable. Please check if your null modem cable has the following pinouts. Both serial cable connectors have to be DB-9 female.
| Signal Name |
DB-9 Pin |
- |
DB-9 Pin |
Signal Name |
| Receive Data (RxD) |
2 |
- |
3 |
Transmit Data (TxD) |
| Transmit Data (TxD) |
3 |
- |
2 |
Receive Data (RxD) |
| Data Terminal Ready (DTR) |
4 |
- |
6 |
Data Set Ready (DSR) |
| Signal Ground (SIG) |
5 |
- |
5 |
Signal Ground (SIG) |
| Data Set Ready (DSR) |
6 |
- |
4 |
Data Terminal Ready (DTR) |
| Request To Send (RTS) |
7 |
- |
8 |
Clear To Send (CTS) |
| Clear To Send (CTS) |
8 |
- |
7 |
Request To Send (RTS) |
|
View Cart () items
Null Modem Pinouts